What is the purpose of the precision wire comprehensive tester

　　The precision wire comprehensive tester can perform simultaneous testing in three modes: unilateral, spot testing, and general testing. It provides advanced integrated tests of short circuit, open circuit, misalignment, on-resistance, DC high voltage insulation and DC withstand voltage, AC AC withstand voltage leakage current and instantaneous short circuit, and can be visually displayed.

　　Precision wire comprehensive tester working principle

　　Precision wire comprehensive tester can be used to check the on and off of the feeder or optical fiber. A light source (or radio frequency source) is installed in the machine to transmit the signal and transmit it in the tested line. Then the signal is transmitted to the tester to form a loop. After comparing the collected information with the transmitted information, we can get the various indicators we need. Or antenna feeder tester or OTDR (Optical Time Domain Reflectometer), which refers to radio frequency signals, or optical signals, sent to the feeder or optical fiber. These media will reflect and appear, and the equipment will collect the reflected information until the There is a strong signal reflection at the end of the line connected to the load or at the point of failure. It is displayed by means of waveform graphs.

　　Precision wire comprehensive tester function

　　1. The system has automatic scanning and automatic point-finding functions

　　2, provide advanced short circuit, open circuit, dislocation conduction resistance, high voltage insulation, leakage current and instant short circuit test

　　3, provide resistance, capacitance and diode component measurement

　　4. Provide unilateral, standard, multi-segment and spot measurement functions

　　 5. The system provides statistics and printing functions, as well as statistical analysis of defective products

　　6, with remote monitoring and RS232 communication interface

　　7. The system provides file storage and management functions