Wire tester function

1. Test file type

General documents: designated as a single file test

Sequential file: designated as a sequential file test

Automatic judgment: the test system automatically judges it as a file test

2. Test result display

Show all: display test data regardless of error or not

Poor display: display wrong steps

3. Statistics of test results

On: open statistics

Off: Statistics form closed

4. Printing of test results

On: open in the form of print test data

Off: Print test data form is closed

5. Control signal output form

Continuous signal: The signal output by REMOTE is a long signal

Pulse signal: The signal output by REMOTE is a short signal

6. Defective product locking

On: When the test result of the test object is set to be bad, the test stops and all keys are locked

Off: When the test result of the test object is set to be bad, the test can be continued

7. Test the alarm sound

All sound: No matter the test result of the test object is good or bad, it is set to have sound

All silent: No matter whether the test result of the test object is good or bad, it is set as silent

Good product with sound: Only when the test result of the DUT is set to be good, there will be sound

Bad sound: Only when the test result of the test object is set as bad, there will be sound

8. Continuous alarm sound for defective products

On: continuous alarm sound when the test result of the test object is bad

Off: Do not sound a continuous alarm when the test result of the test object is bad

9. Test count display

Show all

Show total