Cable test equipment manufacturer
Independent research and development
- 13924633632
Independent research and development
brief introduction:
PH2511/2512 series DC resistance tester can measure the objects including cable node, relay contact resistance, connector plug resistance, wire resistance, printed circuit and welding hole resistance, grounding resistance, motor, transformer and generator coil resistance; And optional RS232 and HANDLER interface, output comparison result signal, used to connect automation equipment and upper computer computer, which is convenient for automatic operation on the production line.
Performance characteristics
Number display four and a half digits
No clear operation
Test speed: 15 times/sec
Output file comparison result (over limit, qualified and beep)
Data saving function
Handler (optional) interface is used to realize online operation
RS232 (optional) can facilitate data communication with PC and remote control of the instrument
Product number | PH2511 | PH2512 | |||||
monitor | Direct reading value and percentage error are highlighted by digital tube display | ||||||
Reading digits | 4 and a half | ||||||
Measuring range | 10UΩ-20KΩ | 1uO-2MΩ | |||||
Resistance range | Resolution | Accuracy RD%+word | Temperature Coefficient | Resolution | Accuracy RD%+word | Temperature Coefficient | |
20mΩ | 1uO | 0.1 %+3 | 50ppm | ||||
200mΩ | 10uΩ | 0.2%+3 | 50ppm | 10uΩ | 0.05%+3 | 50ppm | |
20 | 100uΩ | 0.1 %+3 | 50ppm | 100uΩ | 0.05%+3 | 50ppm | |
200 | 1mΩ | 0.1 %+3 | 50ppm | 1mΩ | 0.05%+3 | 50ppm | |
200Ω | 10mΩ | 0.1 %+3 | 50ppm | 10mΩ | 0.05%+3 | 50ppm | |
2KΩ | 100mΩ | 0.1 %+3 | 50ppm | 100mΩ | 0.05%+3 | 50ppm | |
20KΩ | 1Ω | 0.1 %+3 | 50ppm | 1Ω | 0.05%+3 | 50ppm | |
200KΩ | ----- | ----- | ----- | 100 | 0.05%+3 | 50ppm | |
2MΩ | ----- | ----- | ----- | 100Ω | 0.3%+3 | 50ppm | |
Measurement function | |||||||
measure time | Fast: 15 times/sec. Slow: 8 times/sec | ||||||
Test terminal configuration | Four ends | ||||||
Cleared | Auto-zero/zero-clearing (clearable when needed) | ||||||
Range switching | Auto/lock | ||||||
Trigger method | Internal/external | ||||||
Save measurement settings | Group 1 | ||||||
Comparative discrimination | |||||||
Signal output | Over upper limit, qualified, over lower limit | ||||||
Beep | Pass, fail, close | ||||||
Limit setting method | Absolute value upper/lower limit; percentage upper/lower limit + nominal value | ||||||
sorting | Optional on/off for upper and lower super-qualified | ||||||
Interface (optional) | |||||||
Interface configuration | RS232, HANDLER | ||||||
General technical indicators | |||||||
Temperature and humidity | 0-40t)/^?0%RH | ||||||
Power supply | 220V±10%/50Hz | ||||||
size and weight | 305x275x110mm/4kg | ||||||
13924633632
