Sincerely established the wire testing machine I064

Number of measurement points

64

Test voltage

DC:50V-1500VDC
AC:50V-1000VAC

resistance（R）

0.1Ω-1MΩ

capacitance（C）

0-1000uF

Capacitance polarity

Accurate polarity determination

Unidirectional diode（D）

Forward voltage drop: 0-7.0V, reverse leakage current: 0-10mA

Bidirectional diode

Forward conduction voltage drop: 0-7.0V, forward conduction current: 0-10mA

Reverse conduction voltage drop: 0-7.0V, reverse conduction current: 0-10mA

On resistance (DOND)

0.01Ω-100Ω
(Different parameters can be set for each connection loop separately)

Insulation resistance (I.S)

1MΩ-1000MΩ

Leakage current (ID)

0.1mA-2mA

Open/short circuit (O/S)

200Ω-50kΩ
(Open circuit resistance and short circuit resistance can be set separately)

Momentary break/short circuit

200Ω-50kΩ

Instant continuity test

0.01Ω-100Ω

Zero way

Open circuit return to zero, short circuit return to zero

Test function

General test

Loop test

Unilateral test

With the test pen, the on-resistance can be tested

Spot test

Automatically find points, you can freely add or subtract test points while learning

Automatic discharge

After the high voltage test is completed, the residual charge in the product is automatically removed

Open/short-circuit endpoint judgment

Can accurately determine the short circuit error endpoint

test method

Contrast with reading line data

Test speed (on)

4096 P-P/sec

Step-by-step testing

A single file can add up to 10 test steps

Defective product locking

The defective product is automatically locked after testing, and the password is unlocked

Remote control*

The system provides 6 output signals, 4 input control

measure time

（Open/Short）

Fast (4ms/time/64 points), medium speed (6ms/time/64 points), slow speed (8ms/time/64 points)

（Cond）

Fast 55 times/sec, medium speed 45 times/sec, slow speed 30 times/sec

0.2S/32net(typical) reference

（Insulation resistance）

A pair of other 3.6S/64net (0..1S)

Two points fast 0.4S/64net (0..1S)

Optimal test

(AC High Voltage)

A pair of other 3.6S/64net (0..1S)

Two points fast 0.4S/64net (0..1S)

Optimal test

（INT.O/S）

2ms/64pin sensitivity

（INT.OPEN）

0.4mS

（Speed Measurement）

0.1Sec basic value

Measurement signal source

Measuring frequency and signal/voltage F/V

100~100KHz /5VDC.20mA Max

Other functions

Advanced features

Four-wire test mode, programmable continuous test, automatic point finding and automatic diagnosis

（Scan Mode）

Automatic identification/timing mode/external trigger/cycle test, switchable

The results show that

Measurement result/error information/test information/group display, switchable

Warning device

Traffic light indicator/screen display/sound effect sound (sound effect can be switched)

operating system

Embedded Linux operating system

Storage device

Up to 256MB FLASH storage, can store up to tens of thousands of test files

Power-on password

Provide power-on input password to start the system

Statistics and test reports

The system provides detailed statistical reports and product test reports

Adjustable backlight brightness

0%-100% program adjustable

Printing function (optional)

Can be connected to a printer to print test reports and statistical reports

Network connection (optional)

All testers can be connected through the local area network, unified management, and data collection

Display screen

Display screen

7-inch (177.8 mm) diagonal color LCD

display resolution

800X3(RGB)X480

Background brightness, typical

250 cd/m2,

Display color

True color

Touch screen (optional)

7 inches diagonal

I/O port

Ethernet port

10BaseT RJ-45 female connector, (all models)

USB

Provide USB 1.1 standard USB Host, USB Bus interface

Remote card input and output*

Can output up to six DC12V relay control signals, and four input TTL level test control signals

power supply

AC line power

Power the test machine

voltage

100VRMS to 120VRMS or 198VRMS~242VRMS, segmented range, user can not adjust, please specify before purchase.

Power frequency

47Hz to 65Hz

Power consumption

Max 80W

Line fuse

In the power plug at the back of the machine, the user can replace the fuse of the same specification

environment

temperature

Working range: +5℃ to +50℃

Non-operating range: -20℃ to +60℃

humidity

Working range: 20% to 80%RH (relative humidity), and the temperature is lower than 32℃. At 50℃, the upper limit is reduced to 21%RH

Non-operating range: 5% to 90%RH, and the temperature is lower than 41℃, the upper limit is reduced to 30%RH at 60℃

Pollution degree

Pollution degree 2: Typical home or office environment

Altitude

Working time limit: 3000 meters
Non-working time limit: 15,000 meters

Random vibration, typical

Working: 0.21 grms from 5Hz to 200Hz, 10 minutes per axis

Non-operating: 2 grms from 5Hz to 200Hz, 10 minutes for each axis

Fall resistance, typical

Can withstand the impact of falling from a height of 60 mm (2.3 inches) to the concrete floor with only surface damage

Mechanical behavior

size

Height: 190 mm (7.4 inches), including base support 200 mm (7.8 inches)

Width: 425 mm (16.7 inches)

Depth: 350 mm (13.8 inches)

weight

Testing machine: 12 kg

With accessories and transport case: 14 kg

Packed for transportation: 16 kg